truck bus steam car wash machine used frame machine for sale
Product description
This bus washing machine is suitable for the common bus, double-deck articulated bus, medium bus to high pressure water and brush washing.
Product features
1. Main components from world famous manufacturers, high reliability, long using life.
2. Chinese foam&super soft brushes, impossible to scratch lacquer, each set could be used for about 100,000 car-times.
3. More washing vehicle type is available.
4. Automatic control with multi-function operation.
5. Drying system and water recyling system optional to protect environment and save water.
Technical data
| Washable car size |
12000*2500*4000mm |
| Machine size |
2150*5200*5500mm |
| Rail length |
20000mm |
| Water consumption |
250 liters per bus |
| Washing time |
5-6 min/bus |
| Power supply&consumption |
380v 50Hz 3Phases 10Kw 4 wires |
OPTION
1.Dryer system(4 dryer motor)
Strong drying system, this system is composed of 4 sets of power of 7.5kW centrifugal high-pressure fan, the wind nozzle with smooth design, so that the wind is more powerful, low noise. The fans install on the column frame, the column uses the square tube is welded, but also galvanized and rust treatment.
2.Automatic tire washing machine and chassis cleaning system
The system is installed at the entrance of the car wash site. When the container truck walks to the turbine, the corresponding high pressure water pump starts to work, and the position of the wheel is washed by high pressure. The system is composed of a high pressure pump, a high pressure pipe and other components, and the whole part is plated with an anti rust paint. The chassis adopts fixed buried installation, through the pressure of water rushed forward side of the side of the truck, the vehicle chassis for high pressure washing.
Container truck tire washing machine technical data is below:
Machine size:2500x3800x1000mm (L x W x H)
Washable car size:2800×4000mm ( W x H)
Conveyor speed: 5-6m/min
Water consumption: 300 liters per car
Power supply & consumption: 380V, 50Hz, 3 phase 5wires 11Kw
Washing Pressure: 12kg / cm
3.Water recycle system
After washing waste water, contains a lot of oil, sediment and washing with detergent residual liquid, to achieve the emissions and recycling requirements, can adopt circulating water processing.
1).System simple
instructions below:
1.1).the use of pump sewage pump into sedimentation tank, physical, chemical reactions under the action of a drug.
1.2). water from the tank into the adsorption filter, by adsorption filtration effect, make water quality reached the standard of discharge and reuse, into the clear water reserviors, recoil slag discharge under the action of a pump at the same time, the pt slag.
1.3). after treated water recycling, is used for washing vehicles and chassis flushing.
2).The technical data:
2.1).Equipment power: 4KW
2.2).Equipment voltage: 380V 3PH 50HZ
2.3).processing capacity:6Ton water /hour
2.4).Area: 2.5 m x2 m
2.5).Maximum working pressure: 5kg / cm The maximum test pressure:8kg / cm
2.6).Out of the water pipe diameter: DN40 Sewage water pipe: DN40
2.7).water consumption 40L.
7.Working process
In the initial position, press the "wash" button, the sprinkler system water spray, the brushes begin to fall, when dropped to the lowest position, the top brush, side brushes began to rotate, the washing machine is moving forward along the guide rail.
When the top brush has a certain degree of contact with the surface of the vehicle, the transverse brush starts to rise, and the vehicle shape is washed along the surface of the vehicle, and the four sets of high pressure water washing and cleaning on both sides of the vehicle are cleaned.
When the side brush of the vehicle washing machine comes into contact with the front surface of the car to a certain extent, the side brushes start to move on both sides, and is cleaned along both sides of the vehicle. When cleaning the vehicle rear surface, top brush begins to decline, the side brushes begin to central closure.
After the end of the positive cleaning, top brush, side brush are beginning to reverse rotation, vehicle washing machine also begins to walk in the opposite direction, when the washing machine from the rear of the car to the front direction of cleaning, until the end of the entire vehicle wash process.
8.After-sale service
Besides the high quality car wash equipment for sale , we also offer you professional after-sale service. These service programs include:
1).Installation support:
We supervise installation and commission every single unit we provide, on client's requests .Technician can be sent all over the world to set up your installation.
2).English documents support:
We provide detail English operating manual and maintenance manual for each model of equipment. These manuals include lots of pictures to show the detail procedures for trouble shooting and spare parts replacement. All documents are carefully designed and easy for user to fellow.
3).Life time technical support:
Quality assurance period: non-human factors, one year warranty. Our experienced customer support team will help you solve technical problems .We guarantee to respond to your inquiry within 24 hours, whether it comes from phone, mail or fax.
4).Parts support:
We will leave necessary parts which is for replacing when we come to install the machine.We also provide life time spare parts mail service to our international clients.
){kind=link}
){kind=link}