| After-sales Service: | 3 Years |
|---|---|
| Warranty: | 20 Years |
| Type: | Tunnel |
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier the details of the tunnel car washing machine
The newest in-bay automatic car wash raises the standard for car wash equipment.
With Revenue Enhancement and Total Cost of Ownership improvements being the main focus, this vehicle wash system delivers the industry's best Return on Investment.
Substantially faster wash speeds lead to increases in vehicle throughput and shorter lines that will make your customers happy. Simplified machine design and lower energy and utility usages reduce operating costs leading to a more profitable car wash operation.
Overview
1. Main components are high reliability with long service life.
2. Automatic control and multi-function operation, such as washing, drying and wax.
3. Tunnel type structure is safe and good view. (Glass wall is optional)
4. High pressure water system clean the vehicle all direction.
5. Small side brushes for wheel cleaning and chassis cleaner.
6. foam & super soft brushes, impossible to scratch lacquer, each set could be used for about 100,000 car-times.
7. Dried by strong fans, to make the car dry rapidly.
8. Water recycling system optional to protect environment and save water.System components:
The main frame, walking system, small side brush, horizontal brush, large side brush, top hair dryer, side hair dryer, spray system, electric control system, control the working table and other components.
1, rack (1 set)
The frame of the channel type washing machine is welded by a rectangular steel pipe and various bending plates, and then, the parts are connected into a whole by bolts. Anti r77ust treatment and surface coating treatment of the left and right columns and top beam. The base of the machine frame can be connected with the ground (or by the form of a large grid seat) with the expansion bolt according to the needs of the customers. Frame around the column and beam are respectively equipped with side brush, horizontal brush, side brush, blowing system and spray system components.
2. small side brush (4 sets)
When the car is in the initial state, the cylinder is inflated, and the small side brush is in the open position. When you press the "start" button, the cylinder begins to exhaust, side brush closure and the reducer under the rotation of the rotary, also of the vehicle before and after the side cleaning. When the small side brush cleaning is completed, automatically stop rotating, the cylinder is inflated, so that it is in the open position again.
3, top brush (1 set)
One end of the cross brush is connected with the guide wheel bracket through a speed reducer, and the other end is directly connected with the support of the guide wheel. The guide wheel bracket slides up and down through the roller in the lifting guide rail. The guide wheel bracket moves up and down through the rotation of the roller. The rotation of the roller is realized by the speed reducer through the chain drive. In order to ensure that the horizontal brush is kept in synchronism with the upper and the lower sliding, the middle is connected with the roller by the connecting shaft. The whole cross brush system is supported on a machine frame through a bearing seat. When the transverse brush work, the horizontal brush speed reducer drives the transverse brush to rotate, when the need to move up and down, the rotation of the speed reducer drives the roller to realize the moving of the horizontal brush. The limit position of the stroke switch to provide the horizontal brush movement.
4, big side brush (4 sets)
A big side brush fixed on the main frame, by the large swing arm, a cylinder, a positioning sensor component composition, when the car arrived at the designated location four branches of a big side brush in sensor and cylinder under the action of automobile side of imitation car cleaning. When the car washer is in a state of return, the cylinder is inflated, and a large swing arm is pulled, thereby making the side brush open to both sides.
5, drying system (4 sets)
Drying part is composed of two parts: the top blowing and side blowing, a total of eight sets of motor combination are respectively fixed on the top and side frame, work, the motor drives the impeller to rotate deliver the high pressure air in the top and the side tuyere, car surface water drops under the high pressure air was blown off.
6, the polish brush system(3 sets,optional)
Dry the water on the car body and polish it at the same time.
7.walking track
The vehicle is parked on the base, and the base and the shell are connected to support the system. Steel bracket is fixed on the base and the bottom of the shell for supporting the conveyor chain, and plays the role of guiding. When the running transmission system starts to work, the front wheel of the vehicle is parked on the base, and when the start button is pressed, the speed reducer drives the driving chain wheel to rotate, so as to realize the transmission chain forward transmission. At this time the delivery roller to pull the front wheel of the vehicle, which makes the vehicle forward, so the whole process of the vehicle is realized.
8, spray water system
Spray system mainly consists of three parts:
8.1, high pressure water spray. The washing machine into the vehicle inlet gantry frame is equipped with a drainage tube, used to wet the vehicle; in the horizontal brush, oblique side brush and moving side brush at the drainage pipes, to water jet cleaning of each system. And cleaning agent is added to the water pipe of the horizontal brush position. When the vehicle travels to the last position of the moving side brush, a drainage pipe to the car spray wax liquid rinse, and finally to air dry processing, so that the vehicle is more beautiful to be washed.
8.2, foam liquid softening treatment. In by washing the vehicle after the initial wet, foam generator in under the action of high pressure gas began on vehicle spraying foam liquid, so that the dirt on the surface of the body to soften after the cleaning.
8.3, chassis, high pressure water washing , when the vehicle in the transmission system driven downward to walk go to side brush between, as long as the user opens the control box on the "chassis" flushing knob and chassis system of vehicle bottom of high pressure water washing.
Also for the convenient user use the winter, in three sets of high pressure water spray pipe at the top are respectively provided with a one-way valve, when the users for a long period of time to stop the use of washing machine, through the one-way valve into the water pipes had compressed gas, water pipes and pumps in the residual water is discharged, to prevent bad pump and the water of the winter cold.
9, pneumatic system
Pneumatic system is an important part of automatic car washing.
Compressed air by pneumatic triple coming out later is divided into four: is a horizontal brush gas road, the pressure regulating valve, a two position three-way electromagnetic valve, the compressed air is sent to the horizontal brush cylinder, two position three-way quick exhaust valve are respectively arranged at the outlet of the air inlet pipeline and two three-way solenoid valve, in the vent is equipped with one-way throttle valve. In addition, the two sides of the supply of the size of the side brush, two-way pneumatic system of large side brush, small side brush two pneumatic systems are the same, respectively, by the pressure reducing valve, five bit three solenoid valve, the compressed air into each cylinder. Fourth way to supply the foam fluid.
10, control system
The core part of the whole machine control system is PLC programmable logic controller. Washing machine cylinder of the pneumatic control system, injection system, the liquid flow direction control the solenoid valve, the photoelectric sensor and proximity switch detection, by the program to achieve horizontal brush, a big side brush, side brush, blowing, injection and track of the traction motor control. Just click "start"
11, ,water recycling system (optional)
| Main machine size | 13800x4000x3000mm (L x W x H) |
| Rail length | 13000mm |
| Min Mounting Dimensions ( length*width*height ) | 13800mm*4000mm*3000mm |
| Max car wash size ( length*width*height ) | 2000mm*2000mm |
| Power Requirement | 220V/42Kw, 50Hz/60Hz 3ph |
| Air switch | 200A air switch |
| Total power | 42kw |
| Water pump motor power | 2.2Kw |
| Air fan motor power | 34Kw / full pressure 11000Pa / air volume 23000 cubic meters |
| Longitudinal motor power | 0.37Kw stepless frequency control |
| Transversal motor power | 2.2Kw servo drive system |
| Washing capacity | 40-50cars per hour |
| air supply | 0.8Mpa(buyer supply) |
| Speed | 5-6m/min |
| Pre-soak consumption | 20~50ML/Car ( Depends on chemical proportioning ) |
| Crystal wax consumption | 20~40ML/Car |
| Water consumption | 100-120L/car, 30-50 liters per car (need water recycle system) |
| Electricity consumption | Standard wash 0.8 KW·H/car, Fine wash 1.2kW·H/car VIP wash 1.6kW·H/car |
Delivery period:EXW, F
OB or CIF
RFQ
1. Q:who are we?
A:We are based in Jiangsu and Zhejiang China, start from 2012,sell to Mid East(20.00%),Southeast Asia(18.00%),North America(15.00%),South Asia(15.00%),South America(12.00%),Western Europe(7.00%),Southern Europe(7.00%),Africa(5.00%),Eastern Europe(1.00%). There are total about 11-50 people in our office.
2.Q: how can we guarantee quality?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.Q:what can you buy from us?
A:car washing machine,spray booth,car wheel aligner,car test line,car lift
4. Q:why should you buy from us not from other suppliers?
A:Our company set up time is not long, but members have more than 10 years of experience, can help you solve the pre-sale, sale, customer service and other aspects of the problem. Our aim is: the supreme enjoyment, good faith service!
5.Q: what services can we provide?
A:Accepted Delivery Terms: FOB;Accepted Payment Currency:USD;Accepted Payment Type: T/T,L/C;
Language Spoken:English,Chinese
6.Q:What's the land dimensions required for machine installation ?
( Length×width×height ) ( minimum sizes for wash bay, devices room not included )
A:HZ-S90: 7000×3300×3100mm
HZ-mini: 7100×3300×3100mm
HZ-H9B(O): 7600×3850×3350mm
HZ-DG: 1000×4000×3300mm
HZ-SG: 8900×4000×3300mm
HZ-T904:11800*4000*3200mm
7.Q:What's average time for each car washing ?
A:It's depends on how many the wash steps, complete wash steps with under chassis wash, presoak, high pressure wash, shampoo, wax, air dry will takes 6~8 mins, the time could be shorten if remove some of steps.
8. Q:How about the air drying result ?
A:Uses design of air fluid mechanics principle to achieve long-distance high-pressure air cylinder, can reach 90% drying result, the stability with safety are much more better than the profiling air drying in brush wash machine.
9.Q:What's the cost for washing one car ?
A:For example in our city , water with electricity cost for one car is about 2RMB, chemicals cost about 1RMB, total 3RMB equals USD0.45
10.Q:Electricity consumption for one complete wash is about 1KWH.
A:Water consumption is about 50L per circle ( one car wash takes 2~3 circles ) Chemicals consumption 20~50ml each kind per car. ( adjustable )
11.Q: How do you control your production quality?
A: We have an independent QC team. Our QC teams do sample inspection, part inspection during production and 100% final inspection before each shipment.
12.Q: Can I have a visit to your company before placing an order?
A: Sure, welcome to visit YANCHENG HONZO company. Our factories locates in Hangzhou Zhejiang province and Jiangsu province.u can send the email advance 7days.
13.Q: What kind of support can I get if I am YANCHENG HONZO's agent?
A: Bottom price, free catalog and gift for marketing, on site training.
14.Q: May I know the delivery time?
A:The lead time of our machine is 15 to 25 working days.
15.Q: What is your payment terms?
A:We accept Alibaba Trade Assurance, TT, etc.
16.Q: Can you provide the whole workshop automotive equipment?
A: Yes. we have 5 series contains nearly all automotive equipment.
17.Q: How long is the warranty?
A: HZ-S90 and HZ-mini are one year;HZ-H9B(O),HZ-DG,HZ-SG are three years, we will send free parts for replacement in warranty, supply spare parts for lifetime.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}